LoginWood is a hygroscopic material, it has the ability to adsorb or desorb water in response to the ambient relative humidity. Thus, the ambient air will affect the moisture content of the wood, and in turn, the dimension of the wood.
Bibliographic database Airbase
AIRBASE is the Bibliographic Database of the AIVC. It contains publications and abstracts of articles related to energy efficient ventilation. Where possible, sufficient detail is supplied in the bibliographic details for users to trace and order the material via their own libraries. Topics include: ventilation strategies, design and retrofit methods, calculation techniques, standards and regulations, measurement methods, indoor air quality and energy implications etc. Entries are based on articles and reports published in journals, internal publications and research reports, produced both by university departments and by building research institutions throughout the world. AIRBASE has grown and evolved over many years (1979 to present day, over 22000 references and 16000 documents available online). For most of the references, the full document is also available online.
Access to the publications is free of charge.
The new schools in Canada are designed to improve indoor environment quality while achieving a much better energy performance than the code compliance requirements.
The work presented is the continuation of the research on the probabilistic modelling of air infiltration carried out by the author over many years.
The association between indoor air quality (IAQ) and sleep quality was investigated in this study.
The indoor air quality is very important for the well-being of occupants, especially in the case of young babies. This research focuses on the air quality of the surrounding air inside a crib with sleeping infants.
The indoor thermal comfort and air quality in classrooms have become of interest worldwide, predominantly because of their influence on children’s health, learning performance and productivity.
This overview focuses on model based control strategies for ventilation in nearly zero energy buildings (nZEB) where slower reactions towards disturbances are expected as a result of high insulation and air tightness of the building envelope (Kill
From a product point of view, today’s state-of-the-art ventilation boxes for residential buildings are generally reliable, efficient and silent according to formal European and national product standards.
As newer homes are being built tighter than the existing housing stock, questions have been raised about the concentrations of pollutants of concern in new homes and how mechanical ventilation systems can address this issue.
Mixed-mode ventilation uses intelligent switching between natural and (partly) mechanical ventilation modes to find the best possible balance between indoor air quality, user comfort and energy consumption.
The French ongoing research project “Durabilit'air” (2016-2019) aims at improving our knowledge on the variation of buildings airtightness through onsite measurement and accelerated ageing in laboratory controlled conditions.
People spend the majority of their time in their own homes and so the indoor environmental conditions are an important determinant of population health and wellbeing and have economic consequences.
Since the 1970s, many authors have discussed the impact of poor airtightness on building energy use, indoor air quality, building damage, or noise transmission.
This paper discusses two particular points of the buildings airtightness measurement method (ISO 9972) in relation with the pressure difference: (1) the nature of the pressure tap and (2) the place of the pressure tap outside.
In school and office buildings, the ventilation system has a large contribution to the total energy use. A control strategy that adjusts the operation to the actual demand can significantly reduce the energy use.
In Switzerland, 70 % of building refurbishments are realised in stages. When only a window replacement is done, the new airtight windows can lead to a reduced infiltration air exchange and subsequently there may be moisture issues, e.g. mould.
This study aims to assess the indoor thermal and environmental quality of low-income households in New South Wales, Australia.
Due to the wind induced pressure, different results may be obtained if the inside-outside pressure difference is measured across different locations on the building envelope, i.e.
Uncertainties in airtightness measured using fan pressurization test should not be defined by the scattering of the points around the line defined using ordinary least square method anymore.
The estimation of low-rise, residential building infiltration rates using envelope airtightness values from whole building fan pressurization tests has been the subject of much interest and research for several decades, constituting a major topic