LoginThe proposed Annex should bring researchers and industry together to investigate the possible energy benefits by using gas phase air cleaners (partial substitute for ventilation) and establish procedures for improving indoor air quality or reduced
Bibliographic database Airbase
AIRBASE is the Bibliographic Database of the AIVC. It contains publications and abstracts of articles related to energy efficient ventilation. Where possible, sufficient detail is supplied in the bibliographic details for users to trace and order the material via their own libraries. Topics include: ventilation strategies, design and retrofit methods, calculation techniques, standards and regulations, measurement methods, indoor air quality and energy implications etc. Entries are based on articles and reports published in journals, internal publications and research reports, produced both by university departments and by building research institutions throughout the world. AIRBASE has grown and evolved over many years (1979 to present day, over 22000 references and 16000 documents available online). For most of the references, the full document is also available online.
Access to the publications is free of charge.
The implementation of decentralised ventilation units is growing, especially in the residential retrofit.
Nowadays the improvement of building airtightness is an essential condition to achieve high energy performance of buildings. Therefore, there is a need to precisely describe and quantify buildings infiltrations.
Ventilation is critical in interpreting indoor air quality (IAQ), yet few IAQ assessments report ventilation rates; even when they do, the measurement method is often not fully described.
Over the past few years there have been advances in sensing of some pollutants, primarily particles, that might lead to ventilation controls based on direct sensing of pollutants – particularly those relating to health.
Buildings represent a major end use of energy throughout the world and are typically the dominant sector for electricity.
In a recently built zero-carbon neighborhood, demand controlled exhaust ventilation systems (DCMEV) and mechanical ventilation systems with heat recovery (MVHR) are compared under operational conditions, with focus on the energy performance of bot
The air renovation of a building should be controlled in order to ensure a proper level of indoor air quality while minimize heat losses. It is a crucial point for the future energy efficiency goals.
The steady pressurisation method measures the building leakage in a range of high pressures, typically 10-60 Pa.
In France, the control of ventilation system at commissioning is mandatory in the context of the Effinergie + label and the measurement of airflows in residential houses is mandatory since 2017 in this label.
The interest in phase change materials (PCMs) as a solution for thermal energy storage has been growing for the last decades. It is clear that PCMs are promising for reducing the summer heat peaks without increasing the energy demand for cooling.
This study deals with ventilation effects on measured and perceived indoor air quality (IAQ) in a demonstrator building where IAQ problems can occur.
Diffuse ceiling ventilation is a novel air distribution concept, where the space above a suspended ceiling is used as a plenum and fresh air is supplied into the occupied zone through perforations in the suspended ceiling panels.
The work reported in this paper extends previous work on the feasibility to characterise air leakage and mechanical ventilation avoiding intrusiveness of traditional measurement techniques.
The difficulty in measuring IAQ indicators like VOCs and particles, lies in the multiplicity of the composition of these pollutants.
Use of Demand Controlled ventilation (DCV) can potentially save more than 50% of energy use for ventilation purposes compared to constant air volume (CAV) ventilation.
The air tightness of eight apartment buildings containing six to eleven units each on three or four floors has been tested with and without guard-zone pressure, i.e. with and without consideration of internal leakages.
In this paper a new methodology is presented to determine airtightness of buildings. The common method for airtightness testing is through fan pressurization with a blower door test. The new methodology also uses fan pressurization.
Controlled Natural Ventilation (CNV) is one of the potential most effective passive cooling technique to reduce cooling needs of buildings in temperate-hot climate zones.
Air infiltration contributes to a heat loss typically representing up to one third of the heating demand of a building. The building airtightness, also quantified as air leakage, is the fundamental building property that impacts infiltration.