The 29th AIVC Conference, Advanced building ventilation and environmental technology for addressing climate change issues, was held in Kyoto, Japan, 14-16 October 2008.

Contains 165 papers 

Volume content

Enter a comma separated list of user names.
This paper gives the status on the regulation on ventilation in the different regions of Belgium for residential and non residential buildings.
S. Prieus, N. Heijmans, C. Delmotte, P. Van den Bossche, D. Wuyts
A new innovative design concept for the indoorair conditioning systems is proposed. Thisconcept uses passive control and modularly airdiffusion devices and aims complying with boththernial conifort and energy efficiencyobjectives.
Nastase, I.; Meslem, A.
In this work the problem of the estimation of achange in the dynamics and time-varyingthermal parameters for a wall from experimentaldata is solved in several ways.
Enriquez, R.; Jimenez, M.J.; Heras, M.R.
A radiant heating applied to floor, so called'Ondol', is a traditional heating method in Koreaand has been widely used.
W.J. Hwang, Y.M. Kim, J.Y. Sohn
Honda Wako Building(hereinafter called HWB)" is ahigh efficiency saving energyoffice building with six floorshaving 52,138-m2 of total floorarea.
Tamura, F.; Yokoyama, H.; Orima, M.
Energy-efficient building design often makes use of night-time ventilation or thermal slab activation. The quality of the design tools used depends on the quality of the empirical valuesused within them such as heat transfer coefficients.
Hudjetz, S.; Koenigsdorff, R.; Rees, S.J.; Cook, M.J.
The aim of this paper is to have a generaldiscussion of the status regarding energybuilding codes in relation to TAQ concerns.First, there is a brief discussion of the trends inenergy regulations and in IAQ concerns.
P. Wouters, C. Delmotte, P. Van den Bossche, N. Heijmans
Realistic knowledge of window-opening andfans use behaviour is needed, for the thermalsimulation of naturally ventilated buildings. Ifcontrols such us windows and fans wereefective and easy to use, thermal discomfortcould be largely avoided.
Rijal, H.B.; Humphreys, M.A.; Nicol, J.F.
A numerical model of an underfloor air distribution system was created to aid future research on the system's environmental performance. A validated numerical model can serve to minimize the need for costly experimental setups.
Chang, J.
In the desiccant dehumidifier using adsorbentsuch as silica gel and zeolite, outdoor moist airis dehumidified in adsorbent.
Y. Momoi, R. Yoshie, A. Satake, H. Yoshino
In this study, field measurements andinvestigations have been carried out tounderstand the energy consumption and indoorenvironment of a sustainable designed officebuilding.
Shi, T.; Usami, Y.; Yoshino, H.; Makiko, Y.
The effect of downdraft spoilers is questioned.CFD results are presented for a large atriumequipped with downdraft spoilers ("obstacles")to counteract downdraft from glazed faqades.Simulations are in addition presented for oneandtwo-story test roo
Venas, B.; Borresen, B.A.
This paper describes some qf the thinking behind the thermal comfort provisions of the new European Standard EN1 525 1 (CEN:2007) for free-running buildings. This standard deals with all aspects on the indoor environment.
F. Nicol, M. Humphreys, H. Rijal
This paper investigates the thermal effect of ceiling-mounted light fixtures for a displacement ventilation system. The influence of fluorescent lainps on a ceiling is examined by computational fluid dynamics and experimental methods.
Y. Hashimoto, H. Yoneda
This paper describes the merit of daylighting bycomparing the physical and psychologicalaspects of light and heat radiation.
Maki, Y.; Shukuya, M.; Miyazaki, K.
Experimental study was conducted onimproving air-conditioners' energy efficiencyusing hydroponic roof plants. The air-coolingeffect caused by the solar-shading andtranspiration of hydroponic-cultivated sweatpotato was measured.
F. Wang, H. Yoshida, M. Yamashita
The paper presents the results of mold growthrislzs in a corner wall near an entrance door inan apartment house. The corner wall isrecognized as a trouble spot for condensationand mold risk in apartment buildings.
H.J. Moon, J.W. Park, Y.R. Yoon, S.W. Jee
Air tightness is an important property ofbuilding envelopes. It is a key factor indetermining infiltration and related wallperformanceproperties such as indoor airquality, maintainability and moisturebalance. Air leakage in U.S.
Sherman, M.;
An investigation was performed in a middle-corridor-type elementary school in Tolcyo, Japan, equipped with an air-conditioning system for cooling.Temperatures and C02 concentrations weremeasured in classrooms, corridors and outdoors.Visual inspect
Kurabuchi, T.; Kawase, T.; Fukada, K.; Ilno, Y.; Endo, T.; Yoshino, H.

Pages