AIVC - Air Infiltration and Ventilation Centre

Search form


You are here

Home  |  TN

TN 59: Parameters for the design of demand controlled hybrid ventilation systems for residential buildings

Dorer V., Pfeiffer A., Weber A., 2005
Bibliographic info: AIVC Technical Note 59, 2005, 120 pp
Languages: English Pages (count): 120

This AIVC Technical Note has been produced in the frame of the EU RESHYVENT project, conducted from January 2002 to December 2004. An outline of this project is given in the introduction of this report. The report initially was aimed at the project participants; however, many information may also be of general interest to manufacturers and designers of hybrid residential ventilation systems. Therefore it has been made available to a wider audience by publication as an AIVC TN.

For the design of demand controlled hybrid ventilation systems for residential buildings, the report gives detailed background information on topics which are not sufficiently covered by existing literature (e.g. wind pressures or thermal comfort evaluation by CFD simulation). The report also gives detailed information on input data necessary to perform computer simulations for the performance analysis of systems.

Within RESHYVENT, the information and data given in this report were aimed at the industrial consortia for the development and analysis of their systems and performance assessment simulations. Parts of this report were also used for the preparation of the RESHYVENT source book on residential hybrid ventilation.


Related publications

This report summarizes the work of the initial working phase of IEA ECB Annex 62 Ventil
Maria Kolokotroni, Per Heiselberg, Lorenzo Pagliano, Jie Han, Regina Bokel, Peter Holzer, Annamaria Belleri, Denmark
This summary report presents insights on recommendations into how ventilative cooling i
Christoffer Plesner, Flourentzos Flourentzou, Guoqiang Zhang, Hilde Breesch, Per Heiselberg, Michal Pomianowski, Peter Holzer, Maria Kolokotroni, Annamaria Belleri, Denmark
Overheating in buildings is an emerging challenge at the design stage and during operat
Peter Holzer, Theofanis Psomas, Denmark