Describes instrumentation used to measure wind pressure on two tall buildings in central London. Describes pressure transducer which gives an electrical output suitable for use in conjunction with standard types of commercial recording equipment. Describes site installation and recording equipment which produces multi-channel records in ultra-violet sensitive photographic paper. The records are processed and digitised and several computer programs have been written to analyse this data.
Outlines a number of experimental approaches for determining the energy consumption of a building, with emphasis on air infiltration. The combined use of depressurization of the house and infrared scan permits the location of "bypass" vents through which warm air is leaving the structure. Describes several types of bypasses and evidence for their widespread existance is documented. Discusses the side effects of retrofitting these and other energy loss sites with regard to fire safety, air quality and moisture.
Gives theoretical justification for the use of tracer gas method for measuring air infiltration. Describes automated instrumentation system using sulphur hexafluoride as a tracer gas. The system consists of an electron capture detector, an automation unit, an SF6 storage and injection panel, a cassette recorder and corresponding plumbing and tanks. Gives examples of field use of system.
States that much of the heat loss in American houses can be traced to generic faulty details in design and construction. Discusses style of housebuilding in the United States. Notes vast majority of American houses were built of wood. gives a broad classification of typical houses into seven types. Notes variation in energy performance with climatic region. States intention to undertake case studies to assess the energy performance of each type.
Reports the study of joints for a special type of multi-layer wall which has a windproofing layer of asbestos cement cellulose fibre with timber studding. Describes the construction of these walls. In many cases disturbances in the form of draughts, cold wall surfaces and rain water penetration have occurred. Leakage usually occurred at the joint connecting the walls with the structural fabric. Describes laboratory tests which have consisted of measurement of air leakage in joints and joint details.
A sequel to the report "Air leakage through the openings in buildings", abstract. no 286. Reports investigation of the effect on air leakage of increasing the clearance around a sash window. Gives results of experiments in the form of graphs showing leakage for different wind velocities, different clearances, and with and without weatherstripping.
Describes apparatus used to measure air leakage through windows. Gives details of windows with and without weatherstripping. Gives results in the form of graphs in two sections.
The amount of air leakage through window gaps in buildings depends on the width and length of the gaps, the pressures across the buildings and the resistances in the air circuit. Reviews the ranges of these factors for Britain and gives results of measurements within these ranges for standard metal and wooden windows and for weather-stripped windows. Gives two methods of estimating the air flow through gaps in complete windows.
Describes a system which measures the rate of air infiltration in buildings using sulphur hexafluoride as a tracer gas. Discusses two methods for evaluating the infiltration rate,the decay method and the constant concentration method. The system automatically operates a portable electron capture detector /chromatograph and samples air on a one-minute cycle. In the decay method the slope of concentration vs time on a semilogarithmic plot can be used to compute infiltration rate.
Reviews use of tracer compounds to demonstrate the transfer of pollutants from one local area or city to another. A study of gaseous compounds resulted in the selection of three suitable materials:sulphur hexafluoride, bromotrifluoromethan andOctafluorocyclobutane. These materials are all non-toxic, rare in the atmosphere and can be readily dispersed from tanks.Describes two systems developed to detect tracer gases. Sensitivity of 10-5 p.p.m. was achieved for sulphur hexafluoride without concentration of the sample. Gives method for collectingair samples and analysing them.
Login