The purpose of the presented investigation is the comparison between measured data of the laminar and turbulent mixed convection and their approximation by wall functions. New wall functions were implemented in a FVM-research-code using unstructured grids, which was developed by the author. Numerical results are compared with a turbulent closed cavity flow.
In order to assess ventilation systems, ventilation and thermal comfort parameters are calculated. Parameters are temperature and ventilation efficiency and PMV I PPD. Two ventilation configurations are set: the supply grille is under the ceiling and tests are performed for 2 exhaust positions. Both are opposite the ceiling: the first one is under the ceiling and the second one is on the floor. In regards with extract position, the ventilation system is better when extract is on the floor. It appears that the air renewal does not influence neither ventilation nor temperature efficiency.
This paper presents an original air conditioning concept and design development elaborated for a large arena, designed to accommodate the indoor sporting events during the 2000 Olympic Games in Sydney, Australia. An air conditioning system, which provides a great level of flexibility and economical operation, has been developed and its performance studied in detail by the use of our computational fluid dynamics (CFD) software.
Usually, the performance of fan-coils is defined and measured in the laboratories only through thermal quantities. However, comfort conditions within a room depend also on the air flow pattern determined by the appliance. Therefore, an experimental procedure to evaluate the fluid dynamic performance of fan-coils has been developed.
In order to give some guidance for the optimization of shop entrances regarding comfort and energy savings, a project was launched by the City of Zurich. The project covers field investigations in 12 shops with different entrance types, and analytical and numerical investigations (CFD)for complementary results. The emphasis of this work was on the interaction between the situation at the entrance for different technical local solutions with other factors of importance like building ventilation, building tightness and combination with other entrances.
Working spaces in modem buildings are easily formed by interior partitions because these buildings have been designed and constructed as open spaces for flexibility. This could lead to an indoor environment which might be different from the intended design. In this study, the effect of partition on the indoor air quality in a model room has been investigated with different configurations such as the height of' partition and the gap between partition and floor.
Login