LoginThis paper discusses a combination of a dynamic thermal model (HTB2) and a regional energy and emission auditing tool (Energy and environmental prediction model) to analyze the energy efficiency potential of different design strategies, in new or
IBPSA 2007 - Beijing, China
International Building Simulation Conference 2007, Beijing, China.
Contains 288 papers.
Volume content
Planning sustainable in Chinese cities: dwelling types as a means to accessing potential improvements in energy efficiency | 2007 | English
Headquarters of the comisión nacional del mercado de valores. Double façade simulation study | 2007 | English
Nowadays, the use of translucent or transparent façades as lining of another façade is increasing.
Comparison between a new TRNSYS model and experimental data of phase change materials in a solar combisystem | 2007 | English
In the framework of the IEA Task 32 (Solar Heating and Cooling Programme), we developed a numeric model to simulate heat transfer in phase change materials (PCM), and experimental data.
In present lavatory in Japan, the following are being tried for the purpose of further improvement in the amenity : washable seat, heated seat, deodorization with function stool.
A mathematical model for a house integrated with an elevated Chinese Kang heating system | 2007 | English
Chinese kang, a potentially energy-efficient domestic heating system in China, uses high thermal mass to store surplus heat from the stove during cooking and releases it later for space heating.
Time Lags and Decrement Factors under Air-Conditioned and Free-Floating conditions for Multi-Layer Materials | 2007 | English
Time lags and decrement factors for multi-layer materials without air gaps under air-conditioned and free floating conditions were obtained using the response factor and finite volume methods.
Relationship between accuracy of heat conduction calculation and material properties of building slabs | 2007 | English
Conduction transfer function (CTF) is widely used to calculate conduction heat transfer in building cooling loads and energy calculations.
Hydronic radiant floor for heating and cooling coupled with an underground heat exchanger: Modeling approach and results | 2007 | English
This paper explores the simulation of the thermal performance of a radiant floor for heating and cooling that is connected with an underground heat exchanger installed under the concrete floor of a house.