After a clean - what next?

Having paid out a great deal of money to have his ventilation system cleaned the client is entitled to ask 'what do I do next. This short presentation will attempt to answer this question by way of a series of recommendations based on over 40 years experience in Building Services Engineering. The recommendations that I shall make will cover the following points:

Verification of cleanliness of HVAC-systems.

Inner surfaces of the supply air delivery system are part of the indoor surfaces. This and technical performance make it important that cleaning of a HV AC system should be included in a proper maintenance program. Research work and cleaning actions have been done in many countries, however, the methods to verify the cleanliness varies and they seem to measure unequally the cleanliness. Filter sampling method is the most used method for determination of dust and debris amount on the surface.

Ventilation for buildings - Design criteria for the indoor environment.

This Technical Report has been prepared by Technical Committee CEN/fC 1 56, Ventilation for buildings. This Technical Report is intended to assist in providing an acceptable indoor environment for people in ventilated buildings.This Technical Report specifies the requirements for, and methods of expressing the quality of the indoor environment for the design, collllllissioning, operation and control of ventilation and airconditioning systems. This Technical Report covers indoor environments where the major concern is the hwnan occupation but excludes dwellings.

Clean classified HVAC components - a Finnish approach.

To achieve a high standard of indoor air quality for new building requires a special knowledge of emissions from materials, design of ventilation systems as well as construction practice. Besides regulations, common rules and instructions are needed to be obeyed to achieve a good result. Classification of cleanliness of new ventilation systems is a voluntary document which determines the cleanliness of classified components produced by manufacturers.

Heat recovery and the cause of energy efficiency.

What has heat recovery done for the cause or energy efficiency? If some manufacturers or heat recovery equipment are to be believed, the savings in ventilation costs are "quite staggering".

Futile filters.

Standard 62 may hold the answer to the smoking problem, says Ewen Rose

Playing the field.

A US company is using electric fields to remove airborne contaminants. Ewen Rose reports

Roof ice dams. It's not really a roofing problem.

     Nothing highlights construction shortcomings like severe winter storms. Too often, possible problems are neglected during the construction season when winter and its bad weather seem far removed. The winter of 1999 produced many ice dams on shingle roofs in central and eastern Canada. The resulting leaks caused widespread damage to ceilings, walls and interior .furnishings of many homes.     

Pages