Gives basic facts about indoor air pollution for homeowners. Lists common indoor air pollutants and guidelines for generally acceptable levels of selected air contaminants. Some suppliers of measurement equipment are mentioned.

Discusses strategy for dealing with indoor air pollution in office and similar buildings, including verification of the mechanical ventilation system, measurement of building pressure, problems due to stack effect, presence of moisture. Suggests that the causes and cures of indoor pollution are diverse and surprisingly simple. Mechanical ventilation systems should be less complex, have dynamic stability and correct uncontrolled excessive moisture.

Local exhaust ventilation is a more effective system for reducing contaminants in the workplace.

Smoke control makes use of mechanical fans to produce airflows and pressure differences to control smoke movement. Describes one day of tests of the smoke control systems at the 6-storey VA hospital, San Diego, California. 

The Linford project involved designing, building and monitoring 8 low energy passive solar houses. The houses were insulated to current Danish Regulation standards. Seven occupied and 1 unoccupied test house were monitored over two years.

The Linford project involved the design, construction and monitoring of 8 low energy houses in Milton Keynes. The houses were insulated to current Danish Regulation standards and incorporated several passive solar features. Seven occupied and

Knowledge of the air change in dwellings under conditions of use is a prerequisite for the calculation of energy consumption and for evaluation of a dwelling's indoor climate. Air change was measured in a total of 25 occupied dwellings over a

Contains articles on rain penetration and moisture damage in residential construction, moisture sources in houses, control of surface and concealed condensation, and ventilation of houses. Illustrates the various types of condensation problems that may occur, explains the active processes involved in some of these problems and discusses in detail the principal factors surrounding these phenomena i.e. sources of moisture, choice of construction detail, and current ventilation practice.

Recent work has demonstrated the existence of daily and seasonal cycles in attic moisture parameters. Over the course of a day, the attic air humidity may vary by a factor of three, and during the course of a winter there isstorage of perhaps

The principal environmental factors that affect human comfort are air temperature, mean radiant temperature, humidity and air speed. Presents asimplified model of thermal comfort based on the original work of Fanger, whorelated thermal comfort to total thermal stress on the body. The simplified solutions allow the calculations of predicted mean vote (PMV) and effective temperature which (in the comfort zone) are linear in the air temperature and mean radiant temperature, and quadratic in the dew point, and which can be calculated without any iteration.