Airbase

AIRBASE is the Bibliographic Database of the AIVC. It contains publications and abstracts of articles related to energy efficient ventilation. Where possible, sufficient detail is supplied in the bibliographic details for users to trace and order the material via their own libraries. Topics include: ventilation strategies, design and retrofit methods, calculation techniques, standards and regulations, measurement methods, indoor air quality and energy implications etc. Entries are based on articles and reports published in journals, internal publications and research reports, produced both by university departments and by building research institutions throughout the world. AIRBASE has grown and evolved over many years (1979 to present day, over 22000 references and 16000 documents available online). For most of the references, the full document is also available online.

The AIVC website includes a protected content feature that provides access to AIRBASE. Access to the protected content is free of charge but requires you to register first.


 
Regulations relating to building design, construction and occupancy in the various States of the USA are examined to assess the technical bases for their ventilation provisions and to determine if they permit innovation in indoor air quality techn
McNall P E
A representative panel of 37 conventional houses in Eastern Pennsylvania was chosen. Each house was located with respect to its geological formation (the underlying substrate). Blower-door ventilation measurements were made.
Sachs H M, Harrje D, Prichard H W, et al.
Reviews the scientific literature on indoor air pollution.
Small B M
Describes factors affecting condensation: moisture production, ventilation, heating, insulation, and absorbancy.
Willoughby J.
In these instructions for measuring the airtightness and air change rates in buildings, the principles of measurement methodics, the need for measurements and choosing the correct method for different purposes, are presented.
Railio J, Saarnio P
A multi-cell calculation model was developed for calculation of the interconnections between airtightness, air change rates, pressure conditions and energy consumption.
Saarnio P
The share of ventilation in the energy demand in Finnish building stock is about 50 per cent. An essential part of the ventilation heat losses is uncontrolled due to air infiltration, which only partly serves the demand of ventilation.
Railio J, Saarnio P
The Air Infiltration Centre's database, AIRBASE, contains full bibliographic details and concise, informative abstracts in English of published papers covering air infiltration in buildings and related subjects. 
Catriona Thompson
Covers the theory, economics, and practice of draughtproofing existing buildings. The theory section deals with methods of calculating and measuring ventilation losses.
Potter J.
Presents author's impressions from 2nd International Indoor Climate Symposium at Amherst, USA, where 130 new research papers were presented. Considers pollution sources such as NO2, CO and the use of UF foam for thermal insulation.
Fanger P.O.
Discusses difficulties inherent in multiplexity of full-scale trials and the use of EDP simulation in models.
Nielsen P.V.
Many mechanically ventilated buildings are over-ventilated since ventilation rates are based on a fixed number of people (often in excess of the average occupancy) and no allowance is made for infiltration.
Warren B.F.
Discusses a method of calculating the amount and type of ventilation required in an underground car-park, based on likely usage.
Dozias A. Cluzel D. Sarrat P.
Investigates the accuracy of the TWOZONE computer auditing program (used in analyzing the energy performances of residences) when used with home-owner supplied data.
Menicucci D.F. Benson M. Hadfield D. Otis J.
Gives a brief overview of energy-estimating procedures for energy conservation in buildings.
Kusuda T. Sud I.
Describes a predictive model for air infiltration in residential structures. Uses wind speed and outdoor temperature data, along with selected building and site parameters to predict average infiltration.
Modera M.P. Sherman M.H. Grimsrud D.T.
Reviews current methods of ventilation measurement in occupied buildings including tracer methods, pressurisation, and thermography. Gives criteria for good ventilation rate measurement techniques.
Sinclair V.J. Croome D.J. O Cathain C.S.

Pages