AIVC - Air Infiltration and Ventilation Centre

Search form

EBC

You are here

Home  |  model

Integrated energetic approach for a controlable electrochromic device

N.M. Assimalopoulos, A. Tsangrassoulis, G. Guarracino , M. Santamouris, 2004
cooling | model
Bibliographic info: Energy and Buildings, Vol 36, Issue 5, May 2004, pp 415-422, 3 Fig., 2 Tab., 6 Ref. (EPIC - 3rd European Conference on Energy Performance and Indoor Climate in Buildings pp 363-368)
Languages: English

The potential of controlling techniques for an electrochromic device is investigated in a systematic way, using both experimental and theoretical tools. Concerning the theoretical part a model was developed in the TRNSYS environment and validated against experimental data. These data were collected from experiments, which were carried out in a PASSYS test cell with a movable wall. Having established a good model performance several cases of window types (such as a 4mm clear window and a low-e double glazing) and controlling strategies for the electrochromic device are simulated. Obtained results from the series of simulations were compared in terms of the heating and cooling loads of the test cell for each case. It was found that the development of a scheduled

control strategy for the electrochromic glazing is bettering terms of cooling loads.


Related publications

23 May 2019 | New Perspectives on Kitchen Ventilation
INIVE eeig,
25 April 2019 | Ductwork airtightness measurements: protocols
INIVE eeig,
This project deals with reviewing EBC's Annex 5: "Air Infiltration and Ventilation Cent
AIVC,