Airbase publication

Residential ventilation standards, especially in Europe are slowly but substantially moving away from their usual prescriptive approach towards performance based specifications. While academics and policy makers argue about the relevant IAQ indicators, housing developers and end users need to make a choice between the different ventilation system options they are faced with in the market. Although several IAQ rating systems have emerged, a comprehensive assessment method to rate the inherent qualities of the ventilation system itself is not available [6].

Over the last decade, TVOC sensors have been touted as an interesting alternative to CO2 and RH sensors in DCV systems. Nevertheless, there is little evidence on the nature and the profile of TVOC concentrations in modern dwellings.

Balanced ventilation with heat recovery is an efficient way to maintain low heating demand for ventilation in residential buildings. Laboratory measurements of today’s heat recovery ventilation units show high temperature recovery efficiency during standard conditions. In practice, however, the recovery efficiency may decrease due to circumstances that deviate from the standard laboratory conditions.

Combining heat recovery with natural ventilation is a relatively new topic of significant academic and commercial interest. The present study shows the performance of a recently developed Passive Ventilation system with Heat Recovery (PVHR) installed in a primary school building.

In the present paper the impact of natural cross-ventilation on thermal comfort levels in sustainable residential buildings is evaluated. A sustainable dwelling is designed in Crete and various scenarios of different combinations of open windows and doors in the ground floor, the first floor and between the floors are tested to determine the final scenarios with the best possible airflow movement.

Demand controlled ventilation (DCV) can improve the energy performance of all kinds of ventilation systems, in residential and non-residential buildings and is already part of the European Lot 6 and Ecodesign regulations and standards. However, the lack of recognition of DCV in SAP (Standard Assessment Procedure) forms a great barrier for the use of this technology in the UK. A methodology was developed to prove the guarantee on good IAQ, with potential saving on heating and auxiliary energy by modulating ventilation rates based on actual demand.

It has already been proven that a large portion of the energy consumption gap between simulations and reality is due to the occupant behaviour in buildings. The improving airtightness of buildings makes that Indoor Air Quality (IAQ) can no longer rely on air renewal through infiltrations, bringing the need of ventilation systems. Within this frame, an ongoing dissertation focuses on the relationship between occupancy behaviour and ventilation systems in low energy buildings.

Noise from domestic ventilation systems is currently a little understood problem in the UK. Other European countries that have a longer history of using mechanical domestic ventilation systems have introduced noise limits for these systems. Without mandatory limits for noise in UK, noise is not a factor that is often considered during the design. However, noise can be a significant constraint to the use of ventilation systems. Research is reviewed from across Europe and North America that indicates residents turn off ventilation equipment with objectionable noise.

Where residential developments rely on opening windows to control overheating, there can be a compromise between allowing excessive noise ingress with windows open, or excessive temperatures with windows closed. This problem is exacerbated by the move towards better insulated, more airtight buildings and the need, particularly in urban areas, to consider development on noisier sites. A working group has been formed by the Association of Noise Consultants to provide guidance on acoustic conditions and design when considering both the provision of ventilation and prevention of overheating.

The adverse effect of various indoor pollutants on occupants’ health have been recognized. In public spaces flu viruses may spread from person to person by airflow generated by various traditional ventilation methods, like natural ventilation and mixing ventilation (MV Personalized ventilation (PV) supplies clean air close to the occupant and directly into the breathing zone. Studies show that it improves the inhaled air quality and reduces the risk of airborne cross-infection in comparison with total volume (TV) ventilation.