A combination of a wind-tunnel investigation and a mathematical simulation technique conducted on models of two-storey parking garage situated beneath alarge block of buildings (consisting of houses, shopping centre and offices) shows that wind penetrating the partly open garage facades can provide sufficient ventilation. Studies the effects on ventilation of varying the open area of the facades and of fitting openings in the garage roofs. Measures the effect of such ventilation means on air quality close to buildings.

Describes results from wind-tunnel tests on models of the Building Research Establishment's experimental building at Aylesbury. The use of several scale models of this building in uniform and in simulated atmospheric boundary-layer flows together with the results from the full-scale experiments allow an assessment of the effect of variations in the ratio of the longitudinal- turbulence integral length scale to body dimension.

Reviews methods of energy conservation in factories. States that excessive infiltration is unlikely to be the cause of high energy consumption, but that the most significant loads imposed by infiltration probably occur through open loading bays. Suggests the installment of double door lobbies to overcome this. Says the ideal factory heating system would include mechanical ventilation, with outside air mixed with warm "roof level" air. Describes potential sources of energy wastage and ways of rectifying this situation.

Outlines the design of 6 energy efficient houses in Co. Kildare by the Electricity Supply Board, Ireland. The aim of the project is to collect and disseminate information on the costs and benefits of energy efficient houses. The houses will be monitored both occupied and unoccupied over a number of years, using a microcomputer on-site, with the required parameter values eventually being processed on a mainframe computer. Includes a description of the methods to be used in minimizing natural ventilation losses eg improved window joinery, entry point lobbies and appropriate draught sealing.

Outlines a method for measuring the air leakage through the surface exteriors of an apartment, by adjusting the pressure of the adjoining apartments to that of the test apartment, so that no air leakage occurs through adjoining walls.

Describes details of wall and foundation designs that have been used in constructing super-insulated houses on the Canadian prairies. One trend has been the development of the double framing system in which two sets of wall studs are used one

Two series of pressurisation and ventilation measurements have been made in a low-energy house. One of the objectives of the work was to assess the extent to which the ventilation pattern of the house could be improved by modifying its leakage distribution. The first series of measurements was interpreted to understand the ventilation pattern and to make recommendations for the modifications. The second series was used to find out the effects of the modifications.

Reports on a measurement system developed by the Institute of Technology at Tastrup Denmark, involving a microcomputer- controlled system for registering air change rates using tracer gas (nitrous oxide) according to the constant concentration method. The system is designed for measuring and metering tracer gas in up to 10 separate rooms (using an infrared gas absorption detector). It operates through automatic data logging on a floppy disc and can run without supervision for extended periods (up to six days).

Describes LBL's Mobile Infiltration Test Unit (MITU) which spent the 1980-1981 winter in the field collecting the data required for infiltration modelling. Data included measured infiltration rates, surface pressures, wind velocities, indoor and outdoor temperatures, leakage area and leakage distribution. Comparisons of measured infiltration rates with values calculated from surface pressures (using MITU) have shown no decrease in accuracy when a square-root flow model is used instead of the general power-fit model of leakage.

Gives a summary of the existing types of air infiltration measurement techniques and instrumentation using tracer gases. Describes automated air infiltration instrumentation used by researchers in the US, Canada, the UK, Denmark, Sweden and Switzerland. The equipment can operate in the decay mode, constant flow mode and the constant concentration mode.