This paper presents a mathematical model, implemented in a general computer code, that can provide detailed information on the velocity and temperature fields prevailing in three-dimensional buildings of any geometrical complexity, for a given v
This paper deals with the concept of energy efficient houses as integrated systems. Quantitative analysis is used to show that evenly distributed insulation is more effective than excessive insulation applied to only one element of a house and that ventilation rates are a critical factor in determining the magnitude of energy loss. For a new approach to be adopted on a large scale, it is suggested that a means to implement Planned Change is required. Various models to bring about this change are discussed with an indication of the final recipe used for a demonstration project.
Use of computers for simulation of air flows in buildings, leading to production of a mathematical model for analysing the stability of ventilation systems subjected to external forces, and for simulation of heating systems toproduce a mathematical model of heat release and water flow in radiator systems. Investigation of fire ventilation.
Describes the work of the Department of Climate and Building Services of the National Swedish Institute for Building Research. Full scale trials, field measurement and measurement technology and methods applied to indoor climate are described. Research on airtight buildings, radon, air quality and efficient ventilation, occupant requirements and effects on human performance is also summarised. Dummies are used to measure heat transport to or from parts of the body, and for measurement of humidity.
Defines "sick buildings" and describes sensory symptoms reported. Both laboratory research and field trials have been carried out, using a mobile environment chamber, gas dosing equipment, an air analysis laboratory and computer systems. Pattern analysis of indoor air samples indicate importance of interrelationship between a large number of chemical substances and several different sensory perceptions. Lists current research.
The work of this programme includes study of pollutant emissions from combustion appliances: organic emissions from building materials and organic concentrations in the air of office buildings: characterising the source of radon in buildings particularly the entry of radon into residences and the geographic distribution of radon source potential: particles and radon progeny
Moisture enters an attic both from the house and from the ventilation air. It has been assumed that when the roof sheathing temperature cools below the attic air dew point, condensation occurs on the roof sheathing. If this were true, then increased attic insulation levels would require increased attic ventilation rates. Results from an experimental study are presented which show that in fact the roof sheathing is in dynamic equilibrium with moisture in the attic air, and that several hundred pounds of water can be stored in the attic wood without ill effects.
Studies the direct coupling of ventilation heat and solar gains to increase the performance of passive solar systems. Examples of particularly suitable buildings are described. The thermal model FRED, based on a thermal resistance network representing a three-zone building, is modified to include a simple airflow model driven by wind speed and temperature difference. The simulated building is ascribed symmetric permeabilities, then asymmetric permeabilities.
A simple study is described which demonstrates the relative importance of the various parameters which determine ventilation, using basically the single-cell version of the British Gas multi-cell model. The graphs presented can be used directly to estimate natural and mechanical ventilation rates under a wide variety of simple conditions. By adopting a non-dimensional approach which introduces the concept of the whole house leakage Reynolds number, the basis is laid for a more general means of estimating ventilation from graphical data sheets.