Research scientists at the BRE and De Montford University have carried out tests examining the performance and operation of stack ventilation systems in auditoria.

Central Europe is, especially in the residential sector, a region using mainly hydronic systems with static heat transfer surfaces, which operate noiselessly and with slow air movements. Cooling is - as yet - not required. This implies that air-heating systems are not very common in Austria. However, new improved building standards may change this situation, because the specific heat load is significantly reduced. In the building sector, both energy savings and a reduction in C02 emissions can be achieved relatively quickly.

The paper examines the extent to which user's intervention may compromise the therrmal performance of small sunspaces in the context of a Solar Energy Demonstration Project at Easthall in Glasgow (55°52'N), which was monitored from September 1992 to May 1994. Results indicate a tendency to close down windows etc. late in autumn and open them up early in spring relative to heat demand. In other words a user – driven energy load due to ventilation is higher in autumn and spring than in the central winter period.

In a way most heat pumps recover or reclaim heat energy for space heating and cooling, water heating or process heating. In the building sector, the natural heat sources which heat pumps transfer to useful heat, such as outside air, the ground, ground water and sea/lake/river water are in fact all heat sources that consist of solar heat and cannot be directly used for heating due to their temperature. Hence, one can argue that heat pumps which use these sources are (solar) heat-recovery devices.

Demand controlled ventilation systems can be used to minimise energy consumption whilst maintaining satisfactory levels of indoor air quality (IAQ). As an alternative to C02 sensors IAQ sensors (based on Taguchi mixed gas sensors) can be used to infer levels of IAQ. This Technical Note provides details of a series of laboratory and site tests to determine the performance of a range of IAQ sensors.