The book of proceedings of the 11^th International BUILDAIR Symposium "Airtight Buildings, Thermography and Ventilation Systems in Practice",  held on May 24- 25  2019, in Hannover, Germany. Contains 25 abstracts.

It is now internationally accepted by the disciplines of structural engineering and building physics that in the interests of energy efficiency heated buildings should be equipped with airtight building envelopes. The airtightness of the building envelope as a fundamental construction objective is therefore no longer in question. But it is...

In October 2016, a research project was completed on the "Evaluation of faults in airtight layers recommended action for construction practitioners." Written by the Fachverband Luftdichtheit im Bauwesen e. V. (Association for Airtightness in the Building Industry), the Aachener Institut für Bauschadensforschung und angewandte Bauphysik gGmbH...

If there are leaks in an airtight layer which cannot be accessed any longer, the question arises as to whether the structure is still fit for purpose, or in more pragmatic terms: "Can rework be avoided?" Rework is always extremely resource intensive, so it must be specifically required. “Moisture safety” - which is purely a matter of building physics...

Quantification and location of moisture penetration through leak-dependent creeping flows from the room into insulated, lightweight wall structures as a function of design, pressure differential, and leak position. Pressure-dependent, high-precision through-flow measurement in a facade test stand and determination of the amount...

All too often, we experts and measurement technicians are totally fixated on airtightness issues. Based on three practical cases, I would like to demonstrate that windproofness, minimal convection in the insulation layer, and the convective separation of different structural elements from one another should also be taken into account...

In recent years, the level of prefabrication in timber construction has increased many times over. Although breaking down wall sections into prefabricated elements presents few problems at certain interfaces as long as this work and subsequent installation are done with care, unfortunately this is not yet the case for the roof elements. This paper...