Accurately controlling the amount of outdoor air brought into a building is a major factor in ensuring good indoor air quality (IAQ). However, controlling this minimum ventilation volume is difficult variable-air-volume (VAV) systems.
Buildings with different mass levels were monitored in the summer of 1993 in Pala, South California, under different ventilation and shading conditions. The effect of mass in lowering the daytime (maximum) indoor temperatures, in closed and in night ventilated buildings, was thus evaluated. Night ventilation had only a very small effect on the indoor maxima of the low-mass building. However, it was very effective in lowering the indoor maximum temperatures for the high mass building below the outdoor maxima, especially during the 'heat wave' periods.
A simple procedure to determine the best locations for the installation of smoke detectors in residential buildings is presented. Consideration is given to both detection of fires and audibility of the alarm.
Studies at the Oxford Brookes University have shown that opportunities for improving a building's fabric thermal storage performance relate more to aspects of its configuration, control and ventilation strategy than the choice of structural system.
Air movement in a naturally-ventilated room can be induced through the use of a solar chimney or Trombe wall. In this work Trombe walls were studied for summer cooling of buildings. Ventilation rates resulting from natural cooling were predicted using the CFD (computational fluid dynamics) technique. The renoramlization group ( RNG) k-e turbulence model was used for the prediction of buoyant air flow and flow rate in enclosures with Trombe wall geometries.
Gives an overview of current developments into passive ventilation technologies within office buildings and their impact on current ventilation practices. Covers prevention of heat gains, modulation of heat gains, and heat dissipation.
Login