ventilation systems

Characteristics of ultrafine particle emission change depending on the placement of ventilation systems in 3D printer working environment

Submitted by on Wed, 04/17/2019 - 11:44

This study evaluated the emission characteristics of ultrafine particles emitted during material extrusion type 3D printer, called Desktop 3D printer, operation in the test bed and mock-up environmental conditions respectively. For the measurement, a condensation particle counter (CPC) and scanning mobility particle sizer (SMPS) were employed. In the test-bed evaluation, representative materials widely used nowadays such as ABS, PLA, TPU, PC, etc, emitted higher than the UFP criteria (3.5 ×1011) of 2D printer test method RAL-UZ 171.

Static pressure and ventilation rates in rooms

Submitted by on Thu, 04/19/2018 - 10:48

The British Standard Code of Practice, and other authoritative guides, recommend minimum rates of ventilation related to the size and use of rooms, and structural means for providing them. But the difficulty of measuring actual ventilation rates suggests that it is seldom done.

The influence of occupancy behaviour on the performance of mechanical ventilation systems regarding energy consumption and IAQ

Submitted by on Thu, 11/23/2017 - 12:26

It has already been proven that a large portion of the energy consumption gap between simulations and reality is due to the occupant behaviour in buildings. The improving airtightness of buildings makes that Indoor Air Quality (IAQ) can no longer rely on air renewal through infiltrations, bringing the need of ventilation systems. Within this frame, an ongoing dissertation focuses on the relationship between occupancy behaviour and ventilation systems in low energy buildings.

Monitoring the energy- & iaq performance of ventilation systems in dutch residential dwellings

Submitted by on Thu, 05/28/2015 - 11:55

MONICAIR --MONItoring & Control of Air quality in Individual Rooms-- is a pre-competitive field research project of a broad consortium of Dutch ventilation unit manufacturers and research institutes, supported by the Dutch government. The aim is to investigate the indoor air quality (IAQ) performance and energy characteristics of 9 different mechanical ventilation solutions in dwellings that meet strict air-tightness standards and comply with current building regulations.

Flow simulation for design of ventilation systems in animal houses

Submitted by on Wed, 06/18/2014 - 10:49

house is a dominant factor for animal welfare. There are threshold values or recommendations for the most important climate parameters. Temperature, humidity, CO2 and NH3 gas concentrations, germs, dust, odour and air flow velocity have to be observed. Unfortunately the necessary ventilation of livestock buildings leads to emissions, too. So an important aim is to develop ventilation systems that produce: 

Pages