pollution

Reports a study of patterns of domestic energy consumption in the U.S.A. Surveys home energy use and energy use for travel. Recommends ways of saving energy. Discusses sources and distribution of air pollution.

Presents model of indoor pollution that assumes a linear relation between indoor pollutant levels and the air change rate. Discusses effect of heating system and cooking on pollutant levels and ventilation rate. The model predicts that when air change rate is reduced 4-fold, heating systems pollutant contributions can still rise up to 3-fold despite the saving in energy from reducing ventilation. Suggests precautions are necessary when tightening building envelope. Recommends that pilot lights be eliminated and effective kitchen ventilation systems installed.

Heating systems may emit pollutants into living spaces of buildings. Presents model for estimating exposure to pollutants allowing for variation of air change rate and inside-outside temperature differences. Examines the effect of energy conservation measures. Concludes that if ventilation alone is reduced the pollutant concentrations will rise but if reduced ventilation is balanced by increased insulation then pollutant contributions will remain unchanged. The analysis applies only to pollutants generated by the heating system.

Air contaminants include all gases, vapours, liquid droplets and solids, including microogranisms of small size that can be dispersed in air and that are unwanted. Contaminants can be removed by dilution of the air, by deposition of particles on surfaces or by reaction with other materials in air or in space (such as furnishings).< This article discusses in general terms the reduction of contaminants and gives equations of concentrations of contaminants after time t. Discusses types of filters and their effectiveness.

A review of literature reporting investigations of pollution in enclosed spaces. Discusses pollution in sealed environments such as submarines, the relation of indoor to outdoor pollution, sources of indoor pollution, and tobacco-induced pollution. Outlines problem of pollution in transportation- related enclosures such as tunnels, subways and garages. Suggests that indoor pollution in public office buildings is of greater potential harm than outdoor pollution. Gives 18 tables summarising measurements of various indoor pollutants made by different studies.

Discusses in detail a general ventilation model, which relates indoor pollutant concentrations to those outside. When the time interval associated with changes in the outdoor concentration islong compared to that required either to change the air within the building or to remove the pollutant by internal means, the indoor concentration of pollutant can be related to the outdoor concentration by means of a simple expression. Finds good agreement between theory and experiment. Suggests method for reducing indoor ozone levels in California.

Reports measurements of air pollutants inside and outside three pairs of structures for different seasons of the year. Four pollutants were measured, suspended particulate, soiling particulate, carbon monoxide and sulphur dioxide. Describes instrumentation and gives results. Concludes that in homes withgas heating and cooking, the heating system has no effect on CO levels but gas stoves had a significant effect.

Explains method for calculating time dependences and average values of gas and particle concentrations in ventilated rooms, which permits determination of air pollution propagation in a room by means of given target functions. Applies method forvarious ventilation rates. Provides calculated example of determination of gas concentration occurring in a room with a leaky gas container. Illustrates representative time functionfor different pollutants.

Discusses toxic and flammable gases and vapours that lead to hazards in buildings. Examines trends in accidental deaths in the home in England and Wales from gas poisoning. Discusses influence of buoyancy on the dilution by ventilation air of accidental leaks of toxic and flammable gases and shows where buoyancy dominates layers can readily form. Presents theoretical results for controlling gas hazards in buildings by ventilation for a wide range of practical situations.