VIP 14: European ventilation standards supporting the EPBD

The European Directive 2002/91/EC on the energy performance of buildings (the EPBD) imposes to the EU member states several different measures to achieve a more rational use of energy resources and to reduce the environmental impact of the energy use for buildings (see also VIP 9).

VIP 13: Ceiling Fans

Ceiling fans are one of the more credible techniques to decrease the energy consumption for air conditioning and improve comfort. Historically, ceiling fans have first emerged in hot humid climates and have become more and more popular in certain parts of the world from the early decades of the last century.

VIP 12: Adaptive Thermal Comfort and Ventilation

Existing thermal comfort standards and methods cover mainly thermal comfort conditions under steady state conditions. Most of the thermal comfort studies have been carried out in laboratories and are based on evaluations of the heat transfer between the human beings and their environment and of the required physiological conditions for thermal comfort.

VIP 11: Use of Earth to Air Heat Exchangers for Cooling

The present Ventilation Information Paper aims to present the basic knowledge on the use of earth to air heat exchangers. The increased need for air conditioning has made alternative passive and hybrid cooling techniques very attractive.

VIP 10: Sheltering in Buildings from Large-Scale Outdoor Releases

An intentional or accidental large-scale airborne toxic release (e.g. terrorist attacks or industrial accidents) can cause severe harm to nearby communities. Under these circumstances, taking shelter in buildings can be an effective emergency response strategy. Some examples where shelter-in-place was successful at preventing injuries and casualties have been documented. As public education and preparedness are vital to ensure the success of an emergency response, many agencies have prepared documents advising the public on what to do during and after sheltering.

VIP 09: Energy Performance regulations: Which impact can be expected from the European Energy Performance Directive?

In the past and still often today, building regulations and standards don't reflect the state-of-the art with respect to the performance assessment of buildings in terms of energy use and indoor climate. Because of the field of most of these regulations (transmission losses, energy demand for heating,...) and the typical used components, the assessment procedures were rather simple and not really a reflection of the physical behaviour (e.g. dynamic behaviour of buildings).

VIP 08: Airtightness of buildings

If the building envelope is not airtight enough, significant amounts of energy may be lost due to exfiltrating air, or damage to structural elements may occur due to condensation. Air leakage can be avoided by appropriate design and careful construction. Test methods to check the quality of airtightness and to locate the individual leakages are available and are increasingly used.

VIP 07: Indoor Air Pollutants Part 2: Description of sources and control/mitigation measures

VIP Indoor Air Pollutants, Part 1 defined major types of indoor air pollutants, their measurement, and concentrations guidelines. This second part of the VIP addresses the sources of pollutants and effective measures to control them or to mitigate their impacts on occupants and building contents. The most effective means to control indoor air pollution is through reduction or elimination of pollution sources. Indoor pollutants originate both within the building and from outside. The first step in controlling the sources of indoor air pollution is to identify them.

VIP 06: Air-to-Air Heat Recovery in Ventilation Systems

A heat recovery unit transfers heat (some units also moisture) from the exhaust air stream over to the supply air stream, thus reducing the heat loss due to ventilation, and reducing the need to condition the cold supply air. Conversely, in hot and humid outdoor conditions, a heat recovery unit can keep heat (some units also moisture) outside, thus reducing air conditioning costs.

VIP 04: Night ventilation strategies

Addressing successful solutions to counterbalance the energy and environmental effects of air conditioning is a strong requirement for the future. Possible solutions involve the use of passive cooling techniques and in particular of heat and solar protection techniques, heat amortisation and heat dissipation techniques. Recent research has shown that night ventilation techniques may contribute highly to improve thermal comfort in free floating and decrease the cooling energy consumption of air conditioned buildings.

Pages