International Journal of Ventilation, Volume 5, 2006-2007

Volume content

Enter a comma separated list of user names.
Internal pressure coefficients in a building with wind-driven cross-ventilation caused by sliding window openings on two adjacent walls are presented and compared with previous works.
Karava P., Stathopoulos T., AthienitisA.K.
Measurements of indoor air pollutants covering the concentrations of CO2, CO, TVOC’s, PM2.5, and PM10 were performed in 50 residences in Athens.
Santamouris M., Argiroudis K., Georgiou M., Livada I., Doukas P., Assimakopoulos MN,Sfakianaki A.,Pavlou K., Geros V. ,Papaglastra M.
There is a wide range of factors that influence natural ventilation. The uncertainties arising from theunpredictable nature of wind lead to the need to account for periods of time when winds are unable to provide indoor summer comfort.
Aynsley R.
The transmission of SARS in high rise residential buildings in Hong Kong has highlighted the importance of indoor environmental quality. One of the important parameters that requires investigation is natural ventilation.
Lam K.S., Chan D.W.T., Chan E.H.W., Tai C.T., Fung W.Y., Law K.C.
Indoor microbial exposure has been implicated in various adverse health effects.
Su H.J.,Wu P.C., Chien H.P.
This paper attempts to look at the unsteady flow pressure on the blade tip in order to quantify the inception of instability of an axial-flow ventilation fan.
Cao R., Hu J.
Natural ventilation, as a medium for air exchange between the indoor and outdoor environment, is known for its functions of providing outdoor ‘fresh’ air and removing indoor air pollutants.
Lam K.S., Chan E.H.W., Chan D.W.T., Fung W.Y., Law K.C., Tai C.T.
Cross ventilation is one of the most important techniques for achieving energy conservation and for
Nishizawa S., Sawachi T., Narita K., Seto H., Ishikawa Y., Goto T.
Numerical simulations and computational fluid dynamics can be usefully integrated with architecturalmodelling to provide designers with a powerful single CFD based architectural modelling and designframework.
Todorovic M., Ecim O., Marjanovic A., Randjelovic I.
Even if there is only one opening within a room and there is no temperature difference between the inside outside, the room will be ventilated by the external natural wind.
Toshio Yamanaka, Hisashi Kotani, Kiyotaka Iwamoto, Masahiro Kato
The objective of this study is to investigate how measured ventilation rates in dwellings vary over the heating season in a Nordic climate.
Stymne H., Emenius G., Boman C.A.
Underfloor air distribution (UFAD) is a new method of supplying heated or cooled air throughout a building. Reported advantages of UFAD include energy savings and improved indoor air quality (IAQ).
Fisk W.J., Faulkner D., Sullivan D.P., Chao C., Wan M.P, Zagreus L., WebsterT.
Thermal mass, including the building envelope, the interior partition, the furnishing, or even the air inside building, is defined as the mass that can store thermal energy (heat or cooling energy).
Yuguo Li, Pengcheng Xu
This paper presents results of CFD simulations of flow around and through a cubic building with symmetric openings on two opposite sides.
Wright N.G., Hargreaves D.M
In this paper experimental results are used to verify and validate a computational fluid dynamics (CFD) model based on a commercial package. The validation is used to ensure that the CFD model is able to simulate stratum ventilation.
Lin Z., Chow T.T., Tsang C.F.
Growing concern about negative effects on the environment and increasing energy prices stress theimportance of energy efficiency.
Rohdin P., Moshfegh B.
Macroscopic methods of building ventilation analysis developed in the past fifty years have proven to be accurate and thus useful for purposes of single- and multi-zone building infiltration, air quality, smoke spread, thermal comfort, and integra
Axley J., Chung D.
The amount of outdoor air ventilation in buildings is one of the most important determinants of indoor air quality, but many critical questions and misunderstandings exist.
Persily A.
The design protocol for wind-driven cross ventilation in buildings should include two processes, namely the determination of required ventilation rate to reduce the room temperature and the prediction of the ventilation rate resulting from the arr
Sawachi T., Maruta E., Takahashi Y.,Sato K-I
Passive cooling by cross-ventilation has been considered to be a key technology for reducing cooling requirements.
Tatsuo Nagai

Pages