This paper describes a laboratory model for the testing and validation of tracer gas measurement techniques. Previous attempts at experimental validation have often been limited to two zones, or a particular measurement strategy, or a particular range of flows. The model consists of four zones, each of 1m³ internal volume. The zones are connected so that all possible inter-zone flow paths exist. The flow down each path is driven by a pump and monitored by a flow meter. A control panel enables any combination of interzone flows to be set, within the capacity of the pumps.
To predict the thermal and indoor air quality performance of vertical displacement ventilation systems using two-zone modeling, it is necessary to account for the different nature of the air flow due to thermal and contaminant mixing within these zones. Two zone modeling of vertical displacement ventilation was performed assuming piston flow in the clean zone, uniform mixing in the dirty zone, and no recirculation between the zones except via heat source plumes.
The role of ventilation in the housing stack is to provide fresh air and to dilute internally-generated pollutants in order to assure adequate indoor air quality. Providing this ventilation service requires energy either directly for moving the air or indirectly for conditioning the outdoor air for thermal comfort. Different kinds of ventilation systems have different energy requirements. Existing dwellings in the United States are ventilated primatiy through leaks in the building shell (i.e., infiltration) rather than by mechanical ventilation systems.
Login