Submitted by Maria.Kapsalaki on Fri, 03/03/2023 - 08:42
Within the ventilation principle of buildings, the outdoor air is considered as a source of fresh, "clean" air. However, as we all know, this is not always the case. Although the outdoor air quality in our cities already improved, the concentrations of certain pollutants, especially particulate matter and peak pollutions of ozone (and its precursors nitrogen oxides and volatile organic compounds), remain problematic.
Submitted by Maria.Kapsalaki on Fri, 03/03/2023 - 08:39
Outdoor air is usually considered as a source of clean air in building ventilation principles. Although outdoor air quality has already improved in our cities, this principle may be challenged. Particulate matter remains especially problematic. This simulation study investigates the role that the mechanical ventilation system, with or without filtration, plays in the penetration of outdoor air pollutants, which may have adverse effects on indoor air quality and occupant health. Based on the Brussels PM2.5 pollutant data, several configurations were examined using the CONTAM software.
Submitted by Maria.Kapsalaki on Thu, 03/02/2023 - 14:55
Airtight and highly insulated buildings are subjected to overheating risks, even in moderate climates, due to unforeseeable events like frequent heatwaves and power outages. Educational buildings share a major portion of building stocks and a large percentage of the energy is expended in maintaining thermal comfort in these buildings. Overheating risks in educational buildings can lead to heat-stress and negatively impact the health conditions and also cognitive performance of the occupants.
Submitted by Maria.Kapsalaki on Thu, 03/02/2023 - 14:53
The use of the word “resilience” has increased significantly since 2010, however, there is a lack of understanding around 1) how thermal resilience is defined (where some definitions were offered only recently) and 2) what distinguishes it from typical overheating assessments. In addition to this, there is a lack of uptake in the remote monitoring industry (which uses low-cost solutions) when it comes to typical parameters used in thermal comfort studies and there is need to demonstrate how resilience performance can be reported going forward.
Submitted by Maria.Kapsalaki on Thu, 03/02/2023 - 14:51
Urban settings change the microclimate around buildings and resulting thermal comfort inside. This paper presents a method to consider microclimatic conditions, especially the effect of wind variations around the building, which impacts natural ventilation rates and indoor operative temperatures.
Submitted by Maria.Kapsalaki on Thu, 03/02/2023 - 14:49
Current HVAC control systems assume occupant-related information, i.e., preferences, occupancy and behaviour. Furthermore, occupants often have limited control over the indoor environment in non-residential buildings. As a result, occupants are often dissatisfied with the indoor environmental quality (IEQ). This study works towards defining a novel occupant-centric control (OCC) framework which integrates occupants’ feedback regarding their satisfaction with the IEQ. This study collected both occupant satisfaction assessments via surveys and IEQ measurement data in various case studies.
Submitted by Maria.Kapsalaki on Thu, 03/02/2023 - 14:48
In the frame of the project Flux50 smart ventilation, researchers and industrials aim at qualifying ventilation in mid-sized buildings through multidisciplinary consideration of sleep quality, user satisfaction, acoustic comfort, installation, maintenance, resilience and indoor air quality. As those factors may impact at different levels it is important to select a common metric for evaluation. Assessment of financial costs induced by the various categories will be used in that purpose.
Submitted by Maria.Kapsalaki on Thu, 03/02/2023 - 13:32
A smart ventilation system is able to continually adjust itself to provide the desired indoor air quality (IAQ) while minimizing energy use, utility bills, thermal discomfort and noise. A smart ventilation system is also responsive to e.g. occupancy, outdoor conditions, direct sensing of contaminants and can provide information about e.g. IAQ, energy use and the need for maintenance or repair. Technically, all components for such systems are available in the market.
Submitted by Maria.Kapsalaki on Thu, 03/02/2023 - 13:29
The serious social and health crisis faced as a result of the spread of SARS-Cov 2 has highlighted the weaknesses of human beings but has mainly highlighted the inadequate static response of existing buildings; all those confined spaces characterised by the simultaneous presence of a large number of people, such as classrooms, have shown, over the past two years, how unhealthy are because of the high possibility of contraction of the virus inside them.
Submitted by Maria.Kapsalaki on Thu, 03/02/2023 - 13:27
Airborne transmission has been widely proven to be the main means of contagion of SARS-CoV-2 (Severe Acute Respiratory Syndrome Coronavirus 2) , as multiple studies have established (Greenhalgh et al., 2021; Miller et al., 2021; Lidia Morawska & Cao, 2020; Tang et al., 2021; World Health Organization, 2021), Furthermore, the main documented COVID-19 outbreaks have occurred indoors (Qian et al., 2021; Randall et al., 2021; Wang et al., 2022), with medium and long-range transmission —beyond 1.5 m— as a especially relevant transmission way in poorly bad ventilated spaces (Li, 2021; Z.