Food odor dispersion from residential unit to core is one of problems in high-rise residential building. In this study, it was analyzed in terms of stack effect, and the method how optimal air inflow of core was estimated and how the location of air in/outlet were decided were suggested to solve it. A combined CFD (Computational Fluid Dynamics) and CONTAMW analysis was used for stack effect of building, dispersion of food odor, optimal air inflow of core, and the location of air in/outlet in the method.

Interior-surface condensation on the glazed curtain wall of high-rise residential buildings is an important environmental issue in Korea. There are three causes of the surface condensation. One is the curtain wall frame materials, another is the generated moisture from residents' behaviors such as cooking and drying the laundry, the other is inadequate ventilation caused by stack effect.

The opening typology influences the ventilation of the rooms offering more or less resistance to the airflow. The Building Regulation of Maceio of 1985 determines the minimum openings area based on the floor’s area, as 1/6 for light and 1/12 for ventilation. These items have a straight influence on the air flow pattern inside the rooms, as well as on the users’ thermal comfort.

We present a prototypically implemented and empirically tested daylight-responsive lighting systems control in buildings that makes use of realtime sensing and lighting simulation. This system can control the position of window blinds and the status  of the luminaires. It operates as follows: (1) At regular time intervals, the system considers a set of candidate control states for the subsequent time step; (2) These alternatives are then virtually enacted via lighting simulation.

Reliable prediction of daylight availability in indoor environments via computational simulation requires reasonably detailed and accurate sky luminance models. In this paper, we compare three calibration methods to derive detailed sky luminance maps from digital sky images. The results imply that digital sky imaging calibrated with parallel measurements of overall horizontal illuminance levels, can provide an efficient basis for the generation of detailed sky luminance models.

To reduce the potential risk of airborne infectious diseases during an outbreak or to detect a chemical/biological release by a terrorist, it is essential to place appropriate chemical/biological sensors in commercial airliner cabins. This investigation studied sensor responses along the length of a fully occupied twin-aisle cabin with 210 seats by using a validated Computational Fluid Dynamics (CFD) program. The results revealed that seating arrangements can make cross sectional airflow pattern considerably asymmetrical.

This paper analyzed the influence of neutral plane on natural ventilation in workshop. For several typical heights of neutral plane of a molding workshop, its influence on ventilation was simulated by means of CFD. In designing natural ventilation, to coordinate the dimensions between the inlet and outlet openings and to play down the neutral plane properly may be the effective measures to increase ventilation efficiency.

This study assesses the extent of the cooling effects of waterways on the thermal environment of urban districts of Osaka by measurement and simulation. The thermal environments of districts with and without waterways were measured in summer. The effects of the change of configuration of the district near waterway were calculated using computer fluid dynamics simulation. Results show the following. 1) Measured daily mean air temperatures were 0.5–0.8 K lower and SET* was 1.4–2.9 K lower in the district with the waterway than those in the district without waterways in peak summer.

Bases on the concept of task/ambient ventilation, fresh air can be decoupled from re-circulated air so as to improving ventilation effectiveness in breathing zone. Ceiling mounted high velocity circular jet diffusers, which are regarded as remote personalized ventilation air terminal devices (PV ATDs) without affecting room aesthetic effects, can be utilized to supply fresh air without causing draft rating because tropically acclimatized occupants prefer slightly higher air movement. Under-floor air diffusers are used to supply re-circulated air.

This study developed a drift-flux model for particle movements in turbulent indoor airflows. To account for the process of particle deposition at solid boundaries in the numerical model, a semi-empirical deposition model was adopted in which the sizedependent deposition characteristics were well resolved. After validation against the experimental data, the drift-flux model was used to investigate human exposures to particles in three normally-used ventilation types: mixing ventilation (MV), displacement ventilation (DV), and under-floor air distribution (UFAD).