The paper examines the importance of using site-specific data in computer simulation of building energy performance.
IBPSA 2009 - Glasgow, Scotland
International Building Simulation Conference 2009, Glasgow, Scotland.
Contains 307 papers.
Volume content
Assessing the error from failure to account for urban microclimate in computer simulation of building energy performance | 2009 | English
This paper provides a brief, non-exhaustive overview of the status of the application of CFD in building performance simulation for the outdoor environment. It focuses on four topics: (1) pedestrian wind environment around buildings; (2) wind-driv
A jet of cold air is denser then ambient air but it adheres to the ceiling of the room over the given distance when it is blown horizontally close to it.
Building simulation of thermal environment using response factor analysed by three-dimensional CFD | 2009 | English
Indoor climate has a three-dimensional spatial distribution caused by three-dimensional airflow. To obtain the accurate knowledge of building performance, it is demanded to integrate the spatial distribution into building simulations.
A prototype mesh generation tool development for CFD simulations in architecture domain | 2009 | English
Computational Fluid Dynamics (CFD) has been introduced to the architectural engineering and HVAC (Heating Ventilation and Air Conditioning) industry for decades.
Results from a CFD reference study into the modelling of heat and smoke transport by different CFD-practitioners | 2009 | English
The paper describes results from a reference study that focuses on the application of the Computational Fluid Dynamics (CFD-) technique for heat and smoke transport in practice.
Sensitivity analysis of predicted convective heat transfer at internal building surfaces to diffuser modelling in CFD | 2009 | English
As a cost-effective alternative to experiments, computational fluid dynamics (CFD) can provide new insight in airflow patterns and the related convective heat transfer (CHT).
Combining different levels of detail in modelling for an improved precision of HVAC plant simulation | 2009 | English
In this article, we will present a new multi-level modelling approach to obtain higher precision in HVAC plant simulation models.
A two-node heat and mass transfer network model for long-term simulation of void space of high-rise apartment houses equipped with gas-fired boilers | 2009 | English
A simplified model was developed by use of thermal-ventilation network with the purpose of studying air environment in void space at the central portion of high-rise apartment houses when gas-fired boilers were installed in the void.
The performance of hot water space heating systems for mild to warm temperate climates is dominated by the efficiency of boiler operation at low load (i.e. below 25% of nameplate capacity).
For the use in Swiss standards on energy performance of cooled buildings, a chiller model for an hourly time step calculation was needed.
This paper reviews the current situation in M&E (services) engineering in the United Kingdom considering the use of simulation in the building design and engineering process.
Numerical study of the influence of the thickness and melting point on the effectiveness of phase change materials: application to the renovation of a low inertia school | 2009 | English
The renovation of a building in terms of thermal insulation will improve the level of energy consumption in winter.
Numerical method for calculating latent heat storage in constructions containing phase change material | 2009 | English
In Denmark, cooling of office buildings during summer contributes significantly to electrical consumption.
A revised radiant time series (RTS) method for intermittent cooling load calculation | 2009 | English
Most of commercial buildings are intermittently operated in practice.
A mathematical model is presented to predict the behaviour of condensation and frost formation on heat transfer surfaces by simultaneously considering the condensing and frost layer.
Management strategy for improving the energy efficiency of a ground coupled HVAC system | 2009 | English
In this work, we present a new managament strategy for a ground coupled HVAC system in a cooling dominated office area. The idea is disminish the electrical consumption while keeping the thermal comfort requirements.
Simulation of passive down-draught evaporative cooling (PDEC) systems in EnergyPlus | 2009 | English
This paper discusses the development of a new module in EnergyPlus that predicts the cooling performance of PDEC towers with sprays. It introduces an overview of PDEC towers and existing models.
Modeling and experiment analysis of variable refrigerant flow air-conditioning systems | 2009 | English
This study developed a component-based gray-box model for variable refrigerant flow (VRF) airconditioning systems to simulate and predict the performance and energy consumption of VRF system in cooling condition.
Modelling of hydraulic circuits for different heat pump systems in low energy building | 2009 | English
The present paper describes heat pump systems and their energy efficiency. In the first part of the paper the modelling of heat pump system is presented.