The 36th AIVC Conference " Effective ventilation in high performance buildings", was held in Madrid, Spain, 23-24 September 2015. Contains 119 papers and extended summaries.

Volume content

Enter a comma separated list of user names.
Against the background of increased global demands for energy efficiency, property owners should raise the standards of ductwork systems for ventilation, heating and air conditioning.
Toni Nicolas Salame, Rodrigo Sanz, Santiago Pascual
This presentation will explain what exactly calibration should mean.
Paul Simons, Stefanie Rolfsmeier
We conducted observations of wind velocity profiles above a high-density area in Tokyo, Japan, using a Doppler LIDAR system.
Jongyeon Lim, Ryozo Ooka, Hideki Kikumoto
The objective of this paper is to assess the impact of the envelope airtightness on airflow patterns for single detached dwellings depending on the ventilation system.
F. Richieri, B. Moujalled, T. Salem, F.R. Carrié
The Net Zero Energy Residential Test Facility (NZERTF) was constructed at the National Institute of Standards and Technology (NIST) to support the development and adoption of cost-effective net zero energy designs and technologies.
Lisa Ng, Andrew Persily, Steven Emmerich
Constructions joints occur everywhere where several construction materials meet. That’s many meters that need to be taken care off, respecting the function that the materials or the joint need to fulfill.
Filip Van Mieghem
Building airtightness in Germany is on a good way. The latest survey amongst FLiB members shows the n50-values are much better than the benchmarks given in EnEV 2014 (German EPBD).
Oliver Solcher
In timber frame construction in Europe air barrier systems are typically realised at the interior side of the building envelope.
Jelle Langmans, Tadiwos Zerihun Desta, Lieven Alderweireldt, Staf Roels
Interior wooden surfaces have the capacity to buffer the maxima and minima of relative humidity (RH) indoors.
Dimitrios Kraniotis, Tormod Aurlien, Christoph Brückner, Kristine Nore
This paper presents airtightness data measured for about 752 units of high-rise reinforced concrete buildings (apartment buildings) that have been recently constructed within five years in Korea.
Jae Hun Jo, Hyun kook Shin, Kyung Hwan Ji, Myoung Souk Yeo
The paper presents airtightness measurements results of the multi-family building.
Andrzej Górka, Radosław Górzeński, Michał Szymański, Karol Bandurski
Hand-written results are a thing of the past. See how your phone or tablet and common testing gear can perform an automated cloud based test with secure data storage.
Colin Genge
Ventilation of buildings and homes is a key issue both from comfort and energy aspects. However to determine the average ventilation air flow or the Air Change Rate (ACH) for a heating season by tests in case of natural ventilation, involve certai
László Fülöp, György Polics
Over three million subsidised dwellings were built in Spain between 1940 and 1980. Most of these buildings are now obsolete and fail to comply with thermal comfort and ventilation standards.
Jessica Fernández-Agüera, Juan José Sendra, Rafael Suárez, Samuel Domínguez-Amarillo, Ignacio Oteiza
ATTMA, the Air Tightness Testing & Measurement Association has introduced mandatory lodgement for all members, representing over 140 companies and over 350 test engineers across the UK.
Barry Cope
A new low pressure ‘quasi-steady’ pulse technique for determining the airtightness of buildings has been developed further and compared with the standard blower-door technique for field-testing a range of typical UK homes.
Edward Cooper, Xiaofeng Zheng, Christopher Wood, Mark Gillot, David Tetlow, Saffa Riffat, Lia De Simon
Since 2006, the French Energy Performance regulation, named RT, has been allowing two ways to justify building airtightness: either with a measurement or with the application of a quality management approach.
Sandrine Charrier, Jocelyne Ponthieux
The zero pressure compensation method has proven to be the best method to measure air flow rates accurately although it also has be shown that the accuracy depends on the type of air terminal device and how and where the pressure to be compensated
N.J. Bink, Peter Lok, W.V. Struik
Mastering building airtightness is essential to meet the requirements of current and future building codes, not only for saving energy but also for ensuring moisture safety.
Clément Belleudy, Monika Woloszyn, Matthieu Cosnier
Since 2000, the French EP-calculations have been considering thermal losses due to building envelope airtightness.
Adeline Bailly, Gaëlle Guyot, Valérie Leprince

Pages